标题: LCP negotiation failure connecting to PPPoE server 宽带路由故障解决 [打印本页] 作者: kuaidaolz 时间: 2006-10-18 21:40 标题: LCP negotiation failure connecting to PPPoE server 宽带路由故障解决 Please follow these steps to resolve this problem.
1. Call your ISP to double check your “User Name” and “Password”; please remember that they are case sensitive in most circumstances.
2. If your ISP requires you to put your username@isp.net in their software, then please try it without the @isp.net.
3. If your ISP normally only requires you to put in your user name in their software, try username@isp.net
4. You can try inputting your username%@isp.net
5. Additionally please go to “Domain Name” and input the your ISP’s domain. For example if your username and password is username@isp.net, then the domain name would be the “isp.net”
If none of the above steps helped, please go to our website and get a “Firmware Upgrade” for your router.作者: snippers 时间: 2006-10-18 22:20 标题: Re: LCP negotiation failure connecting to PPPoE server 宽带路由故障解决 什么牌子的产品是路由还是猫?
PPPOE拨号吗?
1.帐号名 密码是否正确
2.设置固定DNS
3.固件版本升级
看能否拿到IP来判断拨号是否成功作者: kuaidaolz 时间: 2006-10-18 23:21 标题: Re: LCP negotiation failure connecting to PPPoE server 宽带路由故障解决 原来用的dlink 604+ 无界浏览用不了.
换了linksys 401 无界没问题了.玩游戏的时候又老掉线,比较可气的是linksys全是e文.
请高手帮设置一下参数.作者: 杜2神仙 时间: 2006-10-19 08:42 标题: Re: LCP negotiation failure connecting to PPPoE server 宽带路由故障解决 应可以恢复原厂设置吧，反正俺以前使用的路由器402是在通电的情况下，按住出厂恢复键N秒后就可以复原。作者: snippers 时间: 2006-10-19 22:55 标题: Re: LCP negotiation failure connecting to PPPoE server 宽带路由故障解决 没用过LINKSYS的路由
不过基本的设置应该都差不多，可以浏览网页，证明路由拨号是成功的
1.先问下宽带接入商 ＤＮＳ地址是多少，在路由和电脑里设置成固定的ＤＮＳ
２.看路由是否有防火墙功能，如果有，关掉试下
３.去官方网站看相同型号最新的固件版本是多少，下个最新的升级